KTI Networks KS-220F/C Instrukcja Użytkownika Pobierz pdf (Strona 13)

-9-

Fiber Port and Fiber Connection

When connecting to a 100BASE-FX device using fiber cable, make

sure Port 2 SW4 is set to ON position and TX-to-RX connection

rule is followed.

Since the fiber connector does not support auto-negotiation func-

tion, it is recommended to set SW1 to ON position for the fiber

connection. If SW1 is set to OFF, it operates on half-duplex mode.

Fiber Cables

The required fiber cable for the connection are:

Model /T model /C model /S series

Fiber mode Multimode Multimode Single mode

Wavelength 1300µm 1300µm 1300µm

Connectors ST SC SC

Multimode fiber: 50/125, 62.5/125, 85/125, 100/140µm

Single mode fiber: 9/125µm

The maximum distance connecting to a 100BASE-FX device de-

pends on the device connected and the duplex mode used for the

connection as follows:

1 2 ... 8 9 10 11 12 13 14 15

Brak uwag

KTI Networks KS-220F/C Instrukcja Użytkownika Strona 13