Kti-networks KF223TX Instrukcja Użytkownika Pobierz pdf (Strona 10)

10 Mbps Connection

For 10BASE-T Ethernet networks, the Fast Ethernet adapter uses

Category 3, 4, or 5 UTP cable. To establish a valid 10 Mbps connec-

tion, the cable must be connected to a 10BASE-T hub. Connect the

network cable as follows:

1. Make sure that the plug on the cable is wired appropriately for a

standard 10BASE-T adapter.

2. Align the RJ-45 plug on the end of the UTP cable with the notch

on the adapter's connector and insert it into the adapter connec-

tor as shown in Figure 2-3.

Figure 2-3 Connecting 10BASE-T Cable

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Brak uwag

Kti-networks KF223TX Instrukcja Użytkownika Strona 10