KTI Networks 10BASE-T Instrukcja Użytkownika Pobierz pdf (Strona 12)

3. Making Network Connections

Network Connectors and Rear Switch

The hub provides 8 dual-speed TP ports. Each can support one con-

nection to either a 10BASE-T Ethernet device or a 100BASE-TX Fast

Ethernet device using 2-pair UTP cable. One configuration switch is

located on the rear panel. The switch is used for setting the operation

mode for the hub. Three selections are available as follows:

AUTO mode Set all TP ports to be auto-sensing ports

100M mode Set all TP ports to be 100BASE-TX ports

10M mode Set all TP ports to be 10BASE-T ports

For AUTO mode, each TP port can support either the Ethernet

10Mbps connection or a Fast Ethernet 100Mbps connection with

auto-sensing the connection speed. For 100M mode, the TP port

supports connection to a 100BASE-TX Fast Ethernet device only.

For 10M mode, the TP port supports connection to a 10BASE-T

Ethernet device only.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Brak uwag

KTI Networks 10BASE-T Instrukcja Użytkownika Strona 12